Water Heater Element Replacement: Cost, DIY Difficulty, and When to Hire Out

Repair
By Emergency Water Heater SLC Team · · Updated March 7, 2026 · 4 min read

An electric water heater relies on heating elements (usually two) to warm water. When an element fails, you lose hot water. Replacement costs $20–$80 for the part DIY, or $150–$350 with a plumber. The job is moderately difficult; it involves electrical work and proper safety procedures. Understanding the risks helps you decide whether to DIY or call a pro.


Quick Answer

Heating element failure causes no hot water or reduced supply. DIY replacement costs $20–$80 parts + 1–2 hours labor. Professional replacement costs $150–$350 total. DIY is feasible if you’re comfortable with electrical work and water draining.

Safety risks:

  • Electrical shock
  • Improper sealing (leaks)
  • Incorrect diagnosis (problem might be thermostat, not element)

If unsure, hire a plumber.


Heating Element Basics

Electric water heaters have two heating elements:

  • Upper element: Controls initial heating when the thermostat detects cold water
  • Lower element: Continues heating and maintains temperature

When one fails, the other may still work, leaving some hot water (but reduced supply).

Element lifespan: 5–10 years, depending on water quality and usage.


Failure Symptoms

  • No hot water at all (both elements are dead or electrical issue)
  • Lukewarm water only (one element failing)
  • Hot water runs out quickly (insufficient heating time)
  • Tripped circuit breaker (electrical short in the element)

DIY Element Replacement

Difficulty level: Moderate (requires electrical comfort)

Tools needed

  • Element wrench (special socket, ~$10–$20)
  • Multimeter (verify power is off)
  • Drain pan
  • New heating element ($20–$80)

Steps

  1. Turn off the power at the breaker; verify off with a multimeter
  2. Drain tank halfway (drain valve at the bottom)
  3. Locate upper and lower element access holes (usually on tank sides)
  4. Unbolt the failed element with a wrench
  5. Install new element (hand-tight, then wrench-tight)
  6. Refill tank
  7. Restore power
  8. Wait 30 minutes for the element to heat

Risks

  • Electrical shock (always verify power is off)
  • Cross-threading the new element (causes leaks)
  • Misdiagnosis (thermostat vs element)
  • Incorrect element type (must match amperage)

Professional Element Replacement

Cost: $150–$350

What’s included:

  • Diagnosis (element vs thermostat)
  • Correct element selection
  • Safe installation with leak verification
  • Post-install testing

When DIY Makes Sense

DIY if:

  • You’re comfortable with electrical work
  • You’ve drained a tank before
  • The element has clearly failed
  • You have the right tools

When to Call a Plumber

Call a pro if:

  • You’re uncomfortable with electrical work
  • You don’t own or trust a multimeter
  • Water draining makes you nervous
  • You want a warranty
  • Diagnosis is unclear

Cost Comparison (10-Year Ownership)

ScenarioUpfrontIf Element Fails AgainTotal
DIY (2x failures)$160$160$320
Professional (2x failures)$700$700$1,400
Mixed (DIY then pro)$80 + $250—$330

DIY can save $1,000+ over time, but one mistake can outweigh the savings.


Pre-Replacement Checklist

  • Confirm power is off (multimeter test)
  • Tank has cooled (ideally 24 hours)
  • Element type matches your tank
  • You have the correct element wrench
  • The circuit breaker is clearly labeled
  • Someone knows you’re working (safety precaution)

Find Local Help

If unsure, professional installation removes safety risks and includes a warranty.


FAQ

Can both elements fail at once?
Rarely. Usually one fails first. If both fail, check thermostat or electrical issues.


How do I know which element failed?

  • No hot water: likely lower element
  • Slow heating: likely upper element

A plumber can test both.


Is it OK to run with one failed element?
Temporarily, yes. Expect reduced hot water. Replace within a few days.


What if I cross-thread the new element?
You’ll see leaks around the element. Turn off power, drain, and reinstall properly.


Sources and Update Policy

This article reflects 2026 element costs and safety standards.

  • Angi.com — Water Heater Repair Costs
  • HomeGuide.com — Element Replacement Guide
  • Carter’s My Plumber — Repair Cost Guide
  • New Flow Plumbing — Element DIY Guide
Scroll to Top